+ 86-18052080815 | info@harsle.com

Máquina laminadora de placas, máquina laminadora de chapa W11-16*2000 a la venta

Vistas:22     Autor:Editor del sitio     Hora de publicación: 2019-06-28      Origen:Sitio

Product Description

Plate rolling machine, W11-16*2000 sheet metal rolling machine for sale.

hydraulic plate rolling machine

Main features

      The W11 fully-mechanical symmetric upper adjusting three-roll plate coiling machine is common equipment for bending metal plates. The two lower rolls of the machine are driving rolls and are driven to rotate by mechanical transmission of the motor and the reducer. The upper roll is a driven roll and rises and falls through mechanical transmission that is implemented by the motor, the reducer, a worm and a gear. The multifunctional three-roll plate coiling machine has a special die arranged on one side of an overturned body, and this special die has a section bending function. All actions of the machine are under electrical concentrated control, which makes the operation simple and maintenance convenient. The machine is economic, simple and practical plate coiling equipment.

hydraulic plate rolling machine

●The lower roller is driven by the main motor through the main reducer. The main reducer output shaft transmits to the two lower rollers through a group of gear wheel. The roller driving direction is switched by the main motor. 

●The elevation movement of the upper roller is realized by the auxiliary motor through the auxiliary reducer, which drives worm and worm wheel under the left and right roller bearing to move automatically, makes the steel wire nut which is fixed on the worm wheel rotating, and completed by up and down movement of ball bearing screws accordingly.

hydraulic plate rolling machine

●The offloading device is used after the round cylinder has been finished. Before leaving the left bearing seat, raises the upper roller to standard height, and make the upper roller stop with balance pull rod at the bottom of upper roller. Then draw out pin shaft on the tilting bearing seat, overturn the tilting bearing seat, then the coiled 

product can emerge from one end of the upper roller.

●The main components are: three 45 steel forged rollers, HRC3545, support frame is welded, process after being welded, the lower pallet is a welded part. Ball bearing screw and worm gear are 45 steel forged parts.

●Electrical parts is adopted famous apparatus, steady performance, durable, safe and reliable, operates conveniently.

hydraulic plate rolling machine

Technical Parameters
No. Item Unit W11-16*2000
1 Max Rolling Thickness mm 16
2 Max Rolling Width mm 2000
3 Coiled material yield strength Mpa 245
4 Rolling Speed m/s 5.8
5 Main Rolling Diameter mm 650
6 Upper Roller Diameter mm 260
7 Bottom Roller Diameter mm 220
8 Distance Between Two Bottom Rollers mm 340
9 Dimension mm 4050*1350*1610
10 Motor KW 15

Get A Quote
Derechos de autor2023 Nanjing Harsle Machine Tool Co. Ltd. Todos los derechos reservados.