Vistas:75 Autor:Editor del sitio Hora de publicación: 2023-04-19 Origen:Sitio
Mechanical punch press machine, J23-16T hydraulic punching machine suppliers. The punch is a stamping press. In nationalproduction, the stamping process has the advantages of saving materials and energy than traditional mechanicalprocessing, high efficiency, low technical requirements for operators, and various mold applications that can makeproducts that cannot be achieved by mechanical processing. Therefore, It has more and more uses.
●With an inclinable cast structure, the machine body can incline to allow a punched work-piece or waste material to slide down from the die.
●With a rigid turn-key clutch, the press has single or continuous operation standards.
●The punch press uses a single type brake. The sliding block is equipped with a press-down type safety device that can be pressed down to protect the entire machine.
●Avoid being damaged in case of overpressure.
●The machine has the advantages of high universality, high precision, reliable performance and convenient operation.
No. | Item | Unit | J23-16T | |
1 | Nominal Force | KN | 160 | |
2 | Throat Depth | Mm | 180 | |
3 | Slide Stroke | mm | 60 | |
4 | Slipper Stroke Times | times/min | 100 | |
5 | Shut Height | mm | 250 | |
6 | Shut Height Adjustable | mm | 40 | |
7 | Angle of Inclination | degree | 20 | |
8 | Column Distance | mm | 200 | |
9 | Table Size | mm | 280*450 | |
10 | Table Thickness | mm | 40 | |
11 | Motor Power | KW | 2.2 | |
12 | Slide bottom size | Front and Back | mm | 130 |
Left and Right | mm | 180 | ||
13 | Weight | kg | 700 | |
14 | Dimension | mm | 900*780*1720 |